Furniture Assembly
Beds, dressers, desks, wardrobes, cribs, treadmills and racks — built square, tightened properly and anchored to the wall.
Learn moreClosets & Shelving
Closet Systems, Shelving & Garage Storage
Storage is the thing every household runs out of and almost nobody plans for. Closet systems, floating shelves, pantry shelving, laundry-room uppers, garage overhead racks — all of it’s straightforward to install and all of it fails in the same way: fixed to drywall instead of framing.
I install storage that holds. Rails and standards land on studs. Overhead garage racks go into joists, not into the ceiling board. Floating shelves get concealed brackets that actually transfer load into the wall.
What's included
- Framing located and marked across the full run before anything is fixed
- Rails, standards and cleats leveled across the whole length, not shelf by shelf
- Closet rods, drawers, baskets and doors fitted and adjusted
- Overhead garage racks fixed to joists with structural lag screws
- Load limits explained so you know what each shelf will genuinely carry
- Packaging and offcuts removed
Overhead garage racks: joists or nothing
A 4x8 overhead rack loaded with Christmas decorations and paint cans can easily carry 400 to 600 lb. That load has to go into ceiling joists or trusses running perpendicular to the rack, with structural lag screws of the right length and a proper pilot hole. Fixed into drywall or into the wrong direction of framing, it will hold — right up until it doesn’t, over your car.
Floating shelves and the leverage problem
A floating shelf is a lever. A 12-inch-deep shelf with weight at the front multiplies the pull-out force on the top fixings dramatically. That’s why they sag or rip out. The fix is concealed rod brackets landed in studs, or heavy toggles at minimum, and never relying on the little plastic anchors in the box.
Closet systems in condos
A lot of South Florida condo closets are block on at least one wall. That’s good news for holding power, but it means masonry anchors and a hammer drill rather than a stud finder. Wire and wood systems both work; the install method changes, not the outcome.
What this costs
Small shelf runs are quick. Full closet systems and multi-rack garages are usually quoted flat once I’ve seen the space or a photo.
Recent closets & shelving work
Closets & Shelving — common questions
Do you supply the closet system?
You buy it — you’ll get better value picking your own from a big box store or a specialist. I install whatever you have.
How much weight will an overhead garage rack hold?
The rack manufacturer states a rating, commonly 400 to 600 lb for a 4x8. That rating assumes correct installation into joists. I install to that spec and tell you the real number.
Can you build custom shelving rather than a kit?
Yes — cleated shelving, painted built-ins and pantry shelving in plywood or MDF. Send me the space and what you want to store.
Want to do it yourself?
No hard feelings. Here’s how to do it properly.
- How to install floating shelves that actually holdWhy floating shelves sag and pull out, the leverage math behind it, choosing concealed rod brackets, and realistic load limits by shelf depth for drywall and block.
- Overhead garage storage: how to hang a rack safelyJoist direction, lag screws and pilot holes, load ratings, garage door clearance and truss limits — how to install overhead garage storage that actually holds.
Also useful
Related services
Drywall & Carpentry
Holes, cracks and anchor damage patched so you can’t find them afterwards — plus trim, baseboard, doors and built-ins.
Learn moreGeneral Repairs
The whole list in one visit — sticking doors, loose cabinet hinges, torn screens, wobbly railings and the rest of it.
Learn moreNeed closets & shelving sorted?
Send a photo of the job and get a straight answer, a real price and a date — usually the same day you ask.