Toilets
Running toilets, weak flushes, rocking bowls and full replacements — set on a fresh seal and shimmed so nothing moves.
Learn moreSinks & Faucets
Sink & Faucet Installation and Replacement
A faucet swap looks trivial until you’re lying in a sink cabinet with a basin wrench, discovering the supply stops haven’t been turned in fifteen years and now won’t seal.
I replace kitchen and bathroom faucets, bar and prep faucets, and sinks, along with the supply lines and drain assemblies that go with them. Old braided lines get renewed as a matter of course — they’re cheap and they’re the single most common cause of a cabinet flood.
What's included
- Water isolated and lines drained before disassembly
- Old faucet, supply lines and drain assembly removed
- New faucet set on a fresh gasket or bead of sealant, aligned square to the sink
- New braided stainless supply lines fitted
- Drain and trap reassembled with new washers
- Aerator flushed and every joint checked under pressure
Replace the supply lines every single time
Braided stainless supply lines have a rubber core with a finite life, and a burst line under a kitchen sink at 60 psi will empty a lot of water into a cabinet very fast. They cost a few dollars. There’s no scenario where reusing fifteen-year-old lines is the right call, and I replace them as standard.
Seized shut-off valves
Old multi-turn compression stops seize. If yours won’t close or won’t re-seal after being closed, the faucet job turns into a valve job, and replacing a stop valve means shutting off water further upstream. I’ll tell you the moment I find it rather than discovering it for you mid-flood.
Hard water is a Florida fact of life
South Florida water is hard, and scale is what kills aerators, cartridges and spray heads. If your flow has dropped, the fix is frequently a five-minute aerator clean rather than a new faucet. I’ll check that before selling you anything.
What this costs
A straightforward faucet swap is a short visit. Seized valves, sink replacement or garbage-disposal reconnection add time.
Recent sinks & faucets work
Sinks & Faucets — common questions
What plumbing work do you take on?
Fixture-level work — faucets, sinks, supply lines, traps, disposals, toilets. Anything involving re-piping, water heaters, opening walls or main lines is a licensed plumber’s job and I’ll refer you rather than take it on.
Do you supply the faucet?
You choose it. Pick something with a solid brass body and a ceramic disc cartridge and it will outlive the cheap alternative by years.
My new faucet drips at the base.
Almost always the deck gasket or an under-tightened mounting nut. Quick fix — call me and I’ll come back.
Want to do it yourself?
No hard feelings. Here’s how to do it properly.
Also useful
Related services
Garbage Disposals
Jammed, humming, leaking or dead disposals repaired or replaced — with the dishwasher line connected properly.
Learn moreGeneral Repairs
The whole list in one visit — sticking doors, loose cabinet hinges, torn screens, wobbly railings and the rest of it.
Learn moreNeed sinks & faucets sorted?
Send a photo of the job and get a straight answer, a real price and a date — usually the same day you ask.